Feature
●High grade hole saw 6 inch with 3/8 Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes.
●Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation
●Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge.
●Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed.
●Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring.
●This item is mainly for all kinds of woods and soft material, but not for thick steel plate.
●The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck.
Description
|
|
|
|
|---|---|---|
SHARP SAWThe sharp teeth is HSS M42 Bi-metal saw,it can open hole in shorter time with neat opening. |
BETTER ARBOR AND DRILL BITThe big arbor with two pins, which can lock the hole saw, so that the hole saw can hold heavy duty work.and safer operation. The center drill bit is higher quality, sharp with split tip, it can drill the holes very fast. and stronger. |
OPERATIONThe shank is 3/8 inch, it is good for most of the hammer drill,which have the 3/8" chuck or larger. Perfect for corn hole board drilling and other home projects,it cut clean 6 inch diameter holes through wood,drywall,plastic,even thin soft metal. |
