Feature

●The RFID card reader cant work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
●Support wiegand 26bits or wiegand 34bits output format.
●Ultra-low power consumption, the standby current is less than 50mA.
●It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
●Card Type: Standard 13.56Mhz IC card (Cant support HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc.)


Description

HBK-D01 ReaderHBK-D01 Reader

Wiegand Format:

  • The standard 26-bit Wiegand format is an open format; it is a widely-used industry standard. Almost all access control systems accept the standard 26-bit format which consists of 2 parity bits, 8-bit facility code, and 16-bit card number fields. The Wiegand interface is commonly used to connect a card swipe mechanism to the rest of an access control system.

11
HBK-D01HBK-D01

Features:

  • The maximum reading distance is 6cm.
  • Waterproof, conforms to IP66.
  • It is useful for safety door system, easy to connect and use.
  • Ultra-low power consumption, the standby current is less than 50mA.
  • Support wiegand 26bits or wiegand 34bits output format.
  • Fast response speed, the door opening time is less than 0.3s.
  • This device uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
  • Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
  • The RFID card reader cant work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.

Specification

Working Voltage 12VDC
Static Current ≤50mA
Card Type IC
Transmit Frequency 13.56MHz
Working Temperature -40 to +140°F
Working Humidity 10%-90%RH
Waterproof Rating IP66
Enclosure Material Plastic
Panel Material PC
Enclosure Size 3-35/64" x 1-49/64" x 3/4"
Communication Distance Less than 328ft
Lead Cable Length 9-27/32"
Status Indication Bi-color LED + Buzzer
Wiegand Output Wiegand 26 bit or Wiegand 34 bit (Selectable)
LED Status Indication Red means standby, Green means activated
HBK-D01HBK-D01
Package:

  • 1 x Card Reader
  • 1 x User Manual
  • 2 x Plastic Anchors
  • 2 x #7 x 1" Self-Tapping Screw

Note:

  • Frequency: 13.56MHz
  • Card Type: IC Card (Cant support HID, Cobra, APCiK etc.)
  • Please notice that our wiegand reader cant be compatible with some encrypted cards, such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc.
  • Cant work alone, need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)

Installation:

HBK-D01HBK-D01

  • Remove the back cover from the reader
  • Drill 2 holes on the wall for the self-tapping screws and 1 hole for the cable
  • Put the supplied rubber plugs into the 2 holes
  • Fix the back cover firmly on the wall with 2 self-tapping screws
  • Thread the cable through the cable hole
  • Attach the keypad to the back cover