Feature(may vary by option.)

●【1 Card For Multiple Locks】CODACE coolest hidden lock, you easily program 1 key into several locks as you wish and test it before installation, then you can use 1 key (RFID card/fob or NFC) to unlock several cabinet locks.(Frequency: 13.56mhz)
●【NFC Setup】For iOS, you need to hold an existing transit card or bank card, the card needs to be configured successfully, and add this card to IPhone Wallet. For Android, copy your rfid key to your smartphones wallet via NFC fucntion.
●【High Suitability Hidden Locks】RFID cards can penetrate through thicker wood panels (up to 40mm/1.6”). Fits doors up to 0"-1.3" thick, great for single double-door, sliding-door, wooden cabinets, gun boxes etc. For any non-wood surface, recommend using 3M tape to install instead of screws.
●【Low Battery Auto-unlock】Low-battery status with a long beep, the lock can be used approximately 25 times, when battery is too low, the lock will automatically open, need to replace the battery. Auto-rebounce and auto-lock function.
●【Smart Sturdy Lock】No need to drill holes, No damage to your cabinet. Package：2 x Rfid lock, 2 x Latch, 2 x Rfid card, 2 x Slide Latch, 2 x Tag, 2x Screw set, 2 x USB cable, 2x Induction label and User manual.

[1]




[2]





Description

nfc locknfc lock
rfid lockrfid lock
drawer lockdrawer lock
cabinet lockcabinet lock
lock picklock pick

  • Note: For iOS, you need to hold an existing transit card or bank card, the card needs to be configured successfully, and add this card to IPhone Wallet.

Pre-Installation Preparation(IOS)

1. need an existing transportation card or bank card X1

2. an Iphone with wallet function X 1

3. electronic lock with AAA battery X 1

Add an existing transportation card or bank card

1. Install the battery, then use the included screwdriver to insert it into the hole of the reset button (it can be reset when you hear the sound of Di).

2. Hold the traffic card or bank card near the induction area of the lock until you hear a short sound (successful configuration).

3. Open your IPhone wallet and add this existing card scan to your phone

Input NFC Signal

1. Re-open the wallet and click Use Card.

2. After the electronic lock is unlocked, enter the mobile phone card information and confirm the input with two beeps.

drawer locklockdrawer locklock

Product information