Feature
●Electric foam cutting machine pen with adaptor,ideal for low density styrofoam,art model making,students handmade practise,advertising words making,creative model.Using electric heating to fuse foam for cutting purposes, it is normal to produce odor during melting. Please quickly move the cutting pen to use it
●Hot wire foam cutting pen can cut the foam quickly and smoothly,sealing the edges without leaving any debris!You can cut the template or foam block from any angle and then process it into the desired shape.
●Easy to use,plug the cutting pen into the power socket,and then turn on the switch on the handle to start working.After 30s heating,styrofoam cutter hot wire can be used to cut the foam from any starting pionts.Only use for white soft foam (Low Density styrofoam,please not buy it for high density foam.
●Electric styrofoam cutting tool kit comes with a metal bracket bracket. When you want to take a break, you can put the cutting pen on the bracket. In addition, the anti-slip of the handle is also very good, you dont have to worry about slipping out of your hands while working.
●Heat pipe of the styrofoam cutter cannot be repeated at the bending point. Repeated bending at a certain point may cause break.If you have any problem, please contact me with no hesitate.
Description
Electric foam cutting machine pen with adaptor, It will heat up in a few seconds and cut the styrofoam smoothly and quickly.After heating for a few seconds, you need to use it to cut objects. If you leave the cutting pen unused after heating, the heat cannot be dissipated, which may cause the heating pen to melt and become unusable,because the air conducts heat too slowly.Use for low density styrofoam,art model making,students handmade practise,advertising words making,creative model,creating party decorations.
Specification
Material:Stainless Steel
Cutting Pen Weight:46g
Package Size:27.5*9.4*6.2cm
Power:18W
The Heater Tube Diameter:2mm
Pen Tip Length: 10cm
Electeonic Adaptor: Input: AC100-240V Output:DC7.5V/2.5A
Package Include
- 1 × Electric Foam Cutting Pen
- 1 × Adaptor
- 1 x Stand
- 1 × Instruction Manual
Practical Foam Cutting Pen with Stand
Easy to Use
1. Draw shapes on the foam.
2. Plug in the power supply and turn on the power switch.
3.Start cutting.
4. When you want to rest, please put the cutting pen on the stand.
5. After use, turn off the power and unplug the plug, and wait for the cutting pen to cool down naturally.
Note
1.The foam cutting pen, because of its special structure,can only cut low density foam,not suitable for the batch cutting or large density materials, cannot cut materials other than foam.
2.Single cutting pen doesnt work more than 30 minutes at a time; For a short rest, you can turn off the cutting pen switch. For a longer rest, please disconnect the power transformer.
Cutting Display
|
|
|
|
|---|---|---|
|
When resting, place the tools on the stand. |
Electric foam cutter for art model making. |
Cutting Pen for students handmade practice. |
Cut Different Material
|
|
|
|
|
|---|---|---|---|
Polyethylene Foam |
Styrofoam |
Styrofoam |
Pearl Cotton |
Steps for product-issues
- Choose suitable materials:Only low density foam with low melting point can be cut
- Avoid poor wire contact:When connecting the adapter, it is necessary to rotate the interface to ensure that the adapter is already connected.
- Usage details:After plugging in the power and turn on, it is necessary to wait for 30 seconds before cutting, which can effectively avoid the problem of inability to cut and smoothness caused by low temperature.
