High Efficient and Wide Application Diagnosing Cleaning for Fuel Injector
![Fuel Injector Cleaning Tool Kit](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
8 Pulse Modes (Mode 1 - Mode 8)
Mode 0: Standby, no output
Mode 1 / Mode 5, Single Pulse Low Power/High Power: The Injector Tester will emit a pulse with an approximate pulse width of 255 ms.
Mode 2 / Mode 6, Short Pulse Low Power/High Power: The injector tester will emit 50 pulses with a pulse width of approximately 7 ms.
Mode 3 / Mode 7, Long Pulse Low Power/High Power: The injector tester will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.
Mode 4/Mode 8, Continuous Pulse Low Power/High Power : The Injector Tester will continuously output pulses at a rate of approximately 50 pulses every 1450 ms with a pulse width of approximately 7 ms.
NOTE: During pulse output, the MODE SET button is locked, please press the PULSE button again to terminate output and then the MODE SET button is unlocked, and you can set the mode again.