Feature

●Package contains (20) parallel bars 2 of each size and (1) storage case for your convenience
●Includes 10 pairs of the following heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" & 1-5/8"
●Each parallel is 1/8" thick x 6" long with 2 holes
●Parallel and accurate within +/- .0003"
●Made from quality tool steel- stress relieved against distortion, accuracy ground and hardened Complete with durable plastic case


Description

11

10 Pair 1/8" X 6" Parallel Block Tool Set, 1/2" to 1-5/8" Machinist Matched Thin Parallel Bar Tool Set

22

Parallel Block Tool Set

Material: This product is made of 40Cr steel, with high wear ability, high elasticity, high load and shock absorption and other excellent performance.

Dimensions: All parallel blocks are 6 inches long, 1/8 inches high, and 1/8 to 5/8 inches wide.

Packaging: The parallel block tool set has a layer of rust-proof wax paper and is stored in a portable box. Each pair of parallel blocks has its own space in the box, which is not easy to knock against.

Applicability: Precision machine tool parallel block tool set, very suitable for woodworking, machinist processing work, also suitable for installation and layout and inspection work.

3.13.1

3.23.2

3.33.3

Holes

Each parallel block has two holes, and each pair of parallel blocks is the same size. The sizes of their holes are 13/64", 1/4", 5/16", 3/8", 7/16" and 1/2".

Processing Technology

Products in the production process through finishing treatment and quenching technology, with good hardness, surface finish and long service life.

Product Width

The dimensions of these 10 pairs of parallel blocks are respectively 1/2 ", 5/8", 3/4 ", 7/8", 1 ", 1-1/8", 1-1/4 ", 1-3/8", 1-1/2 " and 1-5/8".

44

Package Includes

This product contains a total of 20 parallel blocks, divided into 10 pairs, each pair is the same size.

55

Note

1. It is best to put the commonly used parallel block into the dryer, which can save the time of oiling and cleaning.

2. Do not put the precision measuring tool near the magnetic field, such as the magnetic work table of the grinder, so as not to make the measuring tool magnetic.

3. Parallel blocks need to be coated with rust oil when used. Parallel blocks that are not used for a long time should be cleaned periodically and recoated with rust oil, at least once a year. (Humid climates should be cleaned twice a year)

4. In the process of using the measuring tool, do not pile up with tools and cutters such as files, hammers, turning tools and drills, etc., so as to avoid hitting the measuring tool. Do not just put on the machine tool, avoid the machine tool vibration and make the measuring tool fall down damage.

Product Information

  • Material: 40Cr Steel
  • Hardness: HRC52-58
  • Parallelism: 0.0002"
  • Tolerance of Size: 0.0003"
  • Length: 6 Inch
  • Height: 1/8 Inch
  • Width: 1/2 Inch to 1-5/8 Inch
  • Holes Size: 13/64", 1/4", 5/16", 3/8", 7/16" and 1/2"

Product information