Feature

●Recommended saw sizes 3.0-6.0 cubic-inch (50-100cc)recommended bar lengths 16"-36" (40-90cm)
●Skip sequence: 72jgx: 3/8" pitch, .050" gauge 73jgx: 3/8" pitch, .058" gauge 75jgx: 3/8" pitch, .063 gauge
●X grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes
●Blued cutters provide superior corrosion resistance
●Warning: oregon 72, 73, and 75jgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders


Description

OREGON 72JGX, 73JGX, and 75JGX (3/8"-pitch Super Guard) chains feature cutters that have an advanced grind geometry that is "work ready". This series saw chain is for professionals who demand saw chain that delivers high performance, resists stretch, simple to maintain, provides long life, and is consistent from loop to loop. The clean ground gullets increase chip flow and the offset ramp-shaped depth gauges reduce roughness which helps prevent the cutter from diving into the sidewall of the cut. The JGX is a Skip Sequence chain.