Feature(may vary by option.)

●Durable and Sturdy: Heavy-gauge steel construction ensures durability and strength; Black powder coat finish resists rust and corrosion; Durable, textured-housing prevents chips and cracks.
●Weize electric jack lets you raise and lower your A-frame trailer quickly and easily. 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor. Provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2".
●To ensure great performance even at night, this jack also comes with a front-facing LED light .The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.
●Come with electric tongue jack protective cover: the cover measures 14″(H) x 5″(W) x 10″(D), it can work with most electric tongue jacks. 600D Polyester Fabric features high tear strength, that is durable and long lasting. Adjustable both-side pulling drawstring with barrel cord lock holds the cover securely in place, keeps your electric tongue jack dry and protects the casing, switches, and light from the elements.
●Warranty: Meets international quality standards. 1 YEAR WARRANTY, dont hesitate to call us if you have any questions, our support team is on standby for YOU.

[3500lbs]




[5000lbs]





Description

1 1

1 1

11

11

11

Features

  • Attach the jack using three bolts (grade 5, 3/8”-16 UNC bolts with washers and nuts or 3/8”-16
  • self-tapping bolts are recommended).
  • Place the star washers between the flat washers and mounting
  • plate as shown in Fig .
  • The star washers are intended to penetrate through the paint on the
  • mounting plate to ensure direct metal to metal contact. Bolts should be tightened to 15-20 ft-lb.
  • If a lower support plate is not already present, install one in the bottom of the trailer frame.

Specs

  • Models Applicable:JA-ETJ35-1-HH-P
  • Maximum Lift Capacity: 3500 lbs (continuous use)
  • Retracted Height:30”
  • Vertical Travel: 18”
  • Power Requirements: 12V DC
  • Outer Tube Diameter: 2 1/5”
  • Power Cord Length: 6’,#12 gauge UL Wire
  • Foot Pad Diameter:6”
  • LED Work Lights For Easy Nighttime Hookups
  • Shipping Weight: 23.15lbs

About jacks

CONTENTS OF KIT:

  • Removable Foot Pad
  • 3/8” Safety Lock Pin
  • Manual Crank Handle
  • Three 3/8” Star Washers

TOOLS REQUIRED:

  • 9/16” Wrench
  • Torque Wrench
  • Wire Cutters
  • Wire Strippers
  • Crimpers or Soldering Iron

Economy

Park your trailer on a level surface and block all dolly and trailer tires. Before operating the jack,attach the foot with the 3/8” safety lock pin provided.

  • Disconnect the jack from the power source.
  • Remove the rubber access cover on the top of the jack.
  • Insert the manual crank handle into the access hole on the top of the jack, engaging the drive screw.
  • Rotate the manual crank handle counter-clockwise to extend the jack, and clockwise to retract it.
  • Remove manual crank handle and replace manual override plug.
88

Note

You always want to be sure when purchasing a tongue jack that the jack capacity at least matches your trailers tongue weight (TW). Your trailers TW should be around 10 percent to 15 percent of your gross trailer weight (GTW), which is the weight of your trailer when its fully loaded.

Product information