Feature
●Powered A-Frame Jack with heavy duty 3500 lbs. lift capacity.
●Powerful 12 DC Motor provides maximum torque to raise or lower your a-frame trailer in a fraction of the time.
●This unit has a built-in circuit breaker which automatically trips and resets if the amperage is too high.
●New industrial design cover is extremely waterproof. Improved LEDs shine down onto your ball and coupler where light is needed the most.
●SPECIFICATIONS: Retracted Length: 9", Extended Length: 27", (Plus 4.5" drop leg), Jack Tube Outer Dia: 2.25".
●1 Year Warranty. Enhance Performance. Easy Installation. High Reliability.
Description
This electric trailer tongue jack is a 12V motor-driven jack that makes coupling and uncoupling from the hitch on travel trailers and boat trailers an easier operation. New industrial design cover is extremely waterproof. Improved LEDs shine down onto your ball and coupler where light is needed the most.
JACK USE AND CARE
- Do not modify the jack in any way.
- Always check for damaged or worn out parts before using the jack.
- Do not force the trailer jack.
- Never attempt to adjust the drop leg when there is any load on the jack.
Components of Kit and Tools Required
- Three Grade 5, 1in. Long, 3/8in.-16 UNC Bolts and Lock nuts (included)
- Three 3/8in. Flat Washers (included)
- 7/16 in. Wrench (owner supplied, not included)
- Torque Wrench (owner supplied, not included)
- Wire Cutters (owner supplied, not included)
- Wire Strippers (owner supplied, not included)
- Crimpers or Soldering Iron (owner supplied, not included)
|
|
|
|
|---|---|---|
HARD-WIRE CONNECTIONConnect the BLACK wire lead from the jack directly to the positive (+) terminal of the battery or junction box. This unit has a built-in circuit breaker which automatically trips and resets if the amperage is too high. Now connect the WHITE ground wire to the negative (-) battery terminal or to the trailer frame. |
MAINTENANCEThe Electric A-frame jack motor is sealed and maintenance-free. It is important to maintain the electrical system including the battery and charger (not included). Ensure all connections are tight and free of corrosion and that the jack is properly grounded . Make sure the battery is fully charged prior to use. |
MANUAL OPERATION INSTRUCTIONSIf for any reason electric power is lost, disconnect the jack from the power source. Remove the rubber access cover on the top of the jack. Insert the manual crank handle into the access hole on the top of the jack, engaging the drive bolt. Rotate the manual crank handle counter-clockwise to extend the jack, and clockwise to retract it. |
