Feature
●The Micca RB42 bookshelf speaker celebrates music reproduction in a handsome package, delivering the next step up in compact speaker performance. With curiously robust bass output and a silky smooth sound signature, it renders all musical genres with faithful authority along with a dose of fun.
●The stout 4-inch woofer is built on a truncated heavy steel frame and substantial magnet structure. Its long throw design incorporates a coated pressed paper cone with concave dust cap, large radius rubber surround, and vented pole piece.
●The tweeter is based on Micca’s popular 0.75-inch silk dome design, using an high efficiency neodymium magnet and a form-cut bezel for tight driver spacing.
●The RB42 owes its tonal balance and transparency to a 10-element crossover that uses high grade film capacitors and air core coils for key components. Both the tweeter and woofer circuits have a 18dB/octave slope to enhance power handling, dramatically reduced lobing, and superior off-axis performance.
●Dressed up in dark wood pattern in clean modern curves and lines, you can show off its good looks anywhere in the home or office. Experience its finger-snapping, hand-clapping, arm-waving, hip-swaying, head-nodding, and toe-tapping performance today.
Description
Micca RB42 Compact Bookshelf Speakers
Celebrate music reproduction in a handsome package, delivering the next step up in compact speaker performance. Compact, affordable, sounds good!
|
|
|
|
|---|---|---|
|
The stout 4-inch woofer is built on a truncated heavy steel frame and substantial magnet structure. Its long throw design incorporates a coated pressed paper cone with concave dust cap, large radius rubber surround, and vented pole piece. |
The tweeter is based on Micca’s popular 0.75-inch silk dome design, using an high efficiency neodymium magnet and a form-cut bezel for tight driver spacing. Translucent mesh fabric over beveled thin frame make up the acoustically transparent grill cover. |
The RB42 owes its tonal balance and transparency to a 10-element crossover that uses high grade film capacitors and air core coils for key components. Both the tweeter and woofer circuits have a 18dB/octave slope to enhance power handling, dramatically reduced lobing, and superior off-axis performance. |
|
|
|
|
|---|---|---|
|
Distortion and coloration is effectively reduced through the use of ¾-inch thick MDF panels on all sides of the enclosure, with 100% miter joints for greater bonding contact area. The enclosure is stuffed to specific density with polyfill to eliminate resonance and enhanced enclosure tuning. |
The RB42 has a versatile sound signature. On the one hand it is fun, energetic, and inviting to listen to for hours on end, but sit down in the sweet spot for a dedicated session and you’ll be rewarded by its revealing qualities full of dynamic detail. |
The bass extension and output is unusually satisfying for such a compact speaker, while its smooth frequency response reproduces music faithfully with engaging tonal balance. The tweeter is level biased just slightly below neutral to reduce listening fatigue without losing a ounce of detail. |
Specifications
- Woofer: 4” Coated Paper, Rubber Surround
- Tweeter: 0.75” Silk Dome
- Crossover: 18dB/Octave
- Freq. Response: 50Hz-20kHz (Typical In-Room)
- Impedance: 4-8 Ohms
- Sensitivity: 83dB 1W/1M
- Power Handling: 15-100 Watts (Each)
- Dimensions: 8.7” (H) x 4.9” (W) x 7.9” (D)
Why Compromise?
Choosing the right speaker can be a classic trade off between small size, low cost, and good sound - you can usually pick only two of the three. The RB42 bookshelf speaker is Micca’s answer that sometimes you can have all three.
Try a Pair In Your Own Home!
We invite you to take a listen and try a pair in your own home with your favorite music. Place them 6-12 inches away from the wall, on speaker stands or on a table top with angled foam isolation pads for optimal results. If they fall short of your expectations, simply return them for a refund.