1. Open the brake bleeder nipple of the caliper
1. Place one end of the vbaxy hose onto the bleed nipple and secure with hose clip(only recommend)
2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper
|
|
|
|
---|---|---|---|
3.1 Loose the brake bleeder Screw a little |
3.2 Start pressing the brake Lever SLOWLY |
3.3 Check until all air bubble has been flushed out |
3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill |
We also provides the following product