ML301 has two modes (TX and RX)
TX sample instruction: Bluetooth Headset/Bluetooth Speaker------Bluetooth-----ML301-----3.5mm Audio Cable-----TV/Projector/Computer
RX sample instruction: Speaker------3.5mm audio cable-------ML301---------Bluetooth-------mobile phone/computer/TV
Here is instruction ,please kindly test the following steps:
1. Switch to the TX mode or RX mode;2. Long-press the power button for 3s to turn on and ready to pair. (LED blue and red flashing); 3,the button on the ML301
RX Mode:1. Place your phone/tv/tablet close to this device, turn on Bluetooth, find ML301 and pair; 2. The LED will stay blue if the pairing succeeds; 3. Insert ML301 into your speaker with 3.5mm jack cable; 4. If you can hear sound from the speaker, that means ML301 is working.
TX mode:1, Place this device close to your Bluetooth headphone/earbuds/speaker ,turn on their Bluetooth; 2, Wait for auto pair. When LED stays on blue,that means they have paired successfully; 3,Insert ML301 into your phone/tv/tablet with 3.5mm jack cable; 4,If you can hear sound from the speaker, that means ML301 is working.
As for different color of LED(Dual click MF button can change color to change audio code):
White means Aptx Low Latency,which can provide super low delay,up to 40ms; Dark Blue means SBC / AAC; iPhone/iPad/Macbook can only is AAC; Light Blue means Aptx; Orange means Aptx Adaptive;
Green means Aptx HD; Only if your headphone support aptX codec, you can change codec, otherwise it will always stay in Blue(SBC/AAC)