Feature
●【EASY 3 STEPS】: Wash your car lens make sure it is clean and free of dust or dirt. Step 1 Wet sanding headlights with souring pads → P1000 discs → P3000 discs → P5000 discs. Step 2 Polishing lights with polishing pad and compound. Wash your headlights again and wipe dry. Step 3 Finish and seal with UV block clear coat application. Enjoy crystal-clear results
●【RESTORES HEADLIGHT】: Provide a deep clean to heavy yellowed, cloudy, dull and hazed headlight lenses. Remove haze, oxidation, cloudiness and corrosion. Restore the clarity and shine you need to see down-road at night. Enhance visibility and safety for night driving
●【SAVE MORE】: POLIWELL headlights restore kit easy to store and enough to restore about 2 lenses. Designed for use on headlights, taillights, fog lights, directional lights and more. Instructions were clear printed on the packaging
●【PROFESSIONAL RESULTS】: With a common household drill, it is easy to restore the heavy cloudy and scratchs in your headlights. Maintain and protect all types of smooth, shiny plastic and acrylic headlights. Brand new restoration result lasts for up to 12 months
●【PERFECT DIY SET】: 2pcs 3 inch 800 grit scrubber scouring pads, 4 pcs each of 1000,3000 and 5000 grit high-precision waterproof sanding discs, back-up sanding pad, drill attachment, soft sponge interface pad, 10 meter masking tape, spray bottle, polishing compound and UV coating
Description
Restore & Protect Your Headlights In 3 Easy Steps !
Before starting, please clean the headlights to ensure that the surface is free of sand and dust to prevent scratches.
STEP 1: WET SANDING
Wet the headlights and sand them with souring pads→1000G→3000G→5000G discs, until dirt and oxides are removed.
STEP 2: FINE POLISHING
Apply the compound to the headlight with the sponge evenly, continue polishing for about 3 minutes, and then thoroughly rinse and wipe dry.
STEP 3: APPLY CLEAR COAT
Apply UV protective liquid evenly to the surface of the headlight and wait for 4-6 hours for it to fully cure.
