Feature

●PS2 Ypbpr Component cable supports PS2 and PS3, it can reach 720P, 1080i, 1080P HD Resolutions.
●RCA (AV) Composite cable supports PS1, PS2 and PS3, it can only reach 240P resolution.
●This Best analog video and audio Signal out of PS2 and PS3 with this highest quality fully shielded cable.
●Shielded, high quality, soft cable gives you the best experience.
●The Premium multi cable is specifically designed to provide the sharpest video and audio for PS2/PS3/and also PS1 gaming system.
●If you have any use problems, please contact the sellers customer service, we will provide you with the most satisfactory after-sales service


Description

Ypbpr + RCA cable for PS1/PS2/PS3
The component multi-out cable is compatible with Sony PlayStation PS1 & PS2 & PS3 & PS3 Slim gaming console.

Ypbpr or Ycbcr components and RCA/AV compsite cable, you can connect the Composite RCA Audio Video Cable to High Resolution TV. (Supports TV / LCD of 240p/ 480p/ 720p/ 1080i/ 1080p )

Adjust PS2 output to RGB mode
1.The yellow lotus head corresponds to the TVs yellow Composite video input jack, and the red and white correspond to the audio channel input.
2.Setting method: boot into the Seven Stars screen without placing the disk, press the direction down and then press the X button, after entering, press the three bottom up or down to find the image output, and then select RGB.

Adjust PS2 output to Ypbpr mode
1.Select the corresponding Ypbpr interface on the TV.
2.(Setting method: boot into the Seven Stars screen without placing the disk, press the direction down and then press the X button, after entering, press the three bottom up or down to find the image output, and then select Ypbpr.)

Adjust PS3 output to Ypbpr mode
PlayStation 3: The "Video Output Settings" option must be set to "Components" in the consoles "Display" (and supported resolutions.) Normally this will work out of the box; if you cant use this cable, follow the steps below Steps to operate:
Settings menu, to reset your PlayStation 3 to the default Ypbpr compatible video mode, press and hold the power button while the console is off until you hear two beeps. Once the console is powered on, navigate the menu and set the "Video Out" Settings" to the desired one.

NOTES
This cable only for PS1,PS2 and PS3. Other game consoles are not supported.

PS1 do not support YPBPR output.

Caution
If you have any use problems, please contact the sellers customer service, we will provide you with the most satisfactory after-sales