Features of RV5.3A:

• Pair Rockville RV5.3A 5.25" 3-way car speakers
• Peak Power Rating: 600 Watts per Pair / 300 Watts Each
• CEA Compliant RMS Rating: 100 Watts per Pair / 50 Watts Each
• Polypropylene woofer gives amazing bass and mids
• Flex Motion Butyl Rubber Surround
• 1.2” PEI dome tweeter with ferrite magnet give amazing highs
• 0.6” super tweeter
• Steel high quality basket
• Rubber magnet boot cover
• Frequency response: 55-20,000 Hz
• Sensitivity: 90 dB @ 1w/1m
• Impedance: 4 Ohm
• Grilles included
• Aluminum voice coils
• 100% oxygen free copper voice coil windings
• Cotton spider material
• Copper terminals
• Cutout diameter: 4.52”
• Magnet: 8 Oz Y25 magnet
• Magnet dimensions: 80mm x 12mm
• Fs: 117.456 hz
• Re: 3.6 OHM
• Qes: 2.561
• Qts: 1.681
• Qms: 4.888
• Fits 5.25” and 5” openings
• Top mounting depth: 1.89” 95% of installs use the top mounting depth)
• Bottom mounting depth: 2.1” (This measures the speaker from top to bottom)

________________________________________________________________________________________________________________________________________

Includes of MAC525S:

• 2 Wakeboard Cans
• All mounting hardware
• (2) 2.375” rubber inserts
• (2) 2.25” rubber inserts
• (2) 2.5” rubber inserts
• (2) 2” rubber inserts
• (2) 1.875” rubber inserts
• (2) 1.75” rubber inserts

Features:

• Pair of Rockville MAC525S 5.25” silver (chrome) aluminum can wakeboard tower enclosures
• Made of high quality 6061 aircraft grade aluminum
• Beautiful white powder-coat finish
• 100% waterproof and fully marinized against salt and fresh water conditions
• Internally wired for clean install—no exposed wires or terminals
• High efficiency design features the perfect airspace for 6.5” speakers
• Rugged universal mounting clamps made of 6061 aluminum
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
• Mounting Depth - 5.5"
• Total Depth - 7.9"
• Cutout - 4.86"
• Diameter - 6.6".
• Mounting diameter - 5.5"
• Height of mount - 3.75"
• Total height of unit - 10"

________________________________________________________________________________________________________________________________________

Included in the box of RGHR2:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!

We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote

Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features

The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps

This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplify your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes