Feature

●POWER: Transmitter power switch,OUT: Press the OUT button to release the winch(release to stop),IN: Press the IN button to wind up the winch(release to stop),LIGHT: The indicator is steady on after power on,and flashes when the it is working.
●The power supply of the remote control is DC12V/DC24V universal,please choose the power supply reasonably when using it.
●The remote control should be turned off when the winch is installed and adjust-ed,especially when arranging the wire rope.
●Make sure to press or release the buttons of the remote control reliably during operation.
●The winch remote control is a wireless product. When using it, the receiver anten-na should be kept away from interference sources such as metal, so as to improve the operating distance of the remote control.

Description

X-BULL New Wireless Winch 2 Remote Control

The remote control produced by our company is suitable for electric winches of 2000 Ibs and above, and can replace the handle to control the winches. Press the IN button of the remote control to retract the rope, release the button to stop the winch; press the OUT button of the remote control to release the rope, release the button to stop the winch

To pair

1. Press the "IN" and "OUT" keys on the transmitter at the same time on state, and the indicator light will flash slowly.

2. Power on the receiver when the indicator light of the transmitter is flashing,and starts the pairing operation. If the receiver moves once, it means that the pairing is successful;

3. Power on the receiver again, and use thetransmitter to control the receiver to work to verify whether the pairing is successful. If itcannot be operated,the pairing process can be repeated.

Safety and precautions in use of remote control

1. The power supply of the remote control is DC12V/DC24V universal,please choose the power supply reasonably when using it.

2. The remote control should be turned off when the winch is installed and adjust-ed, especially when arranging the wire rope.

3. Make sure to press or release the buttons of the remote control reliably during operation.

4. The control handle (signal transmitter)of the remote control and the receiver are paired for use

5. A small battery (3A) is used in thecontrol handle of the remote control. Long-term use or storage for too longwill reduce the power of the battery and affect the working distance of the remote control. In severe cases, the remote control will not work. Replace the battery. If the remote control is not used for a long time, the battery should be removed. It is recommended to replace the battery of the remote control regularly. Note:

The winch remote control is a wireless product. When using it, the receiver anten-na should be kept away from interference sources such as metal, so as to improve the operating distance of the remote control.

Product information