Feature

●23ft for mounting truck caps or camper shells that weigh 200 lbs or less. Fills small to medium bed rail gaps. Fits all bed lengths.
●High quality, long-lasting automotive grade, 18 PCF density EPDM rubber. Preferred by professional installers over PVC/foam seals.
●Excellent compression set resistance for maximum service life and vibration absorption
●Complete kit includes seal, butyl tape, alcohol pads and detailed instructions
●No need to replace this seal every time your cap is removed. MADE IN USA


Description

For truck caps that require less than 23ft of seal use Premium Cap Seal XL 20ft (ASIN: B00NCCX6C2). Seal can be easily cut in half to custom fit trucks with smaller width front bed rails. The two cut seals can also be doubled up to .340" to fill height gaps from the side rails to the front rail. NOTE: To determine if you need to use a Front Rail Seal 6ft (ASIN: B00C0WVV72) measure the difference in height from the trucks side bed rails (including, if any, bed rail caps) to the trucks front bed rail. If the height of the gap is from .340" to .487" install Front Rail Seal on the caps front base rail and install Premium Cap Seal 20ft (ASIN: B00NCCX6C2) on the caps side base rails. If the height of the gap is extra-large, from .488" to .824" install Front Rail Seal on the trucks front bed rail and install Premium Cap Seal 20ft or 23ft on the caps front and side base rails. OTHER QUALITY TRUCK CAP SEALS FROM ESI: To fill all bed rail gaps and for caps over 200 lbs and heavier weighted caps use Ultra Cap Seal 23ft (ASIN: B00MPMBIZW). For trucks with extra wide bed rails, to fill all bed rail gaps and for caps over 200 lbs use Super Cap Seal XL 23ft (ASIN: B00BNGBXOC). IMPORTANT: To completely seal out the elements install an ESI Ultimate Tailgate Seal with Taper Seal to the tailgate gap and sidewalls (ASIN: B00IPQWXZQ), sold separately. MADE IN USA