[20 inch lead]
Proxicasts low-profile active GPS screw mount antenna is designed for use in fleet management, automatic vehicle location (AVL), tracking, mobile video and recreational applications that require peak gain in a compact, vandal resistant form factor. It is ideally suited for vehicular GPS-enabled modems/routers and dedicated GPS receivers. The antenna can be used with passive or active GPS equipment via its integrated 28 dB low noise amplifier (LNA).
The antenna permanently mounts via a 3/8 in (10 mm) hole with internal nut. Includes 20 inches of low-loss RG174 coax fed through center mounting post pre-terminated with a right-angle standard SMA connector. Adhesive pad or optional rubber boot create a water-tight seal. The antenna is not removable from outside and there is no exposed coax cable once installed.
Center Frequency: | 1575.42 MHz |
Passive Gain: | 2dBic(Zenith) |
LNA Gain: | 28 ±2dB Typical |
Polarization: | RHCP |
LNA Supply Voltage: | 2.2-5.0 VDC |
Current Consumption: | 5~15mA |
V.S.W.R: | <1.5 |
Impedance: | 50Ω |
Noise Figure: | <1.5 |
Filter Insertion Loss: | <3dB |
Axial Ratio: | 3dB(max) |
Ex-Band Attenuation: | 12dB@CF+50MHz / 16dB@CF-50MHz |
Cable: | 20 in (0.5 m) RG174 |
Connector: | Right Angle SMA Male |
Material: | ABS / Brass / Steel / Copper / Rubber / Adhesive |
Mounting: | 0.375 in (10 mm) hole - nut & rubber boot included |
Ingress Protection: | IP67 when mounted |
Operating Temp.: | -40 to +85C |
Dimensions: | 1.8 x 0.64 in (46.6 x 16.3 mm) when mounted |
Weight: | 1.8 oz (51 g) |