Max support 7 fans/360mm radiator on the top. Customize the airflow inside the chassis.
The full mesh panels provide good heat dissipation and maintain the lower temperature in the face of high-power hardware.
Supports a maximum of 13 hard disks (10x 3.5" HDD + 3x 2.5" SDD), no need to worry about Insufficient storage problem.
The graphics card is installed vertically, and the front and rear fans form parallel air channels,which can obtain better heat dissipation effect.
If you remove a hard disk bay, the graphics card length supported maximum of 400mm, otherwise it only supported 295mm
USB 3.0 provides a transfer speed of 5 Gbps to improve data transfer efficiency. The top and bottom are equipped with removable magnetic air filters to prevent dust from entering.
ATX/M-ATX/ITX | Motherboard Support | M-ATX/ITX |
400mm | Max. GPU Length | 340mm |
160mm | Max. Cooling Height | 160mm |
200mm | Max. PSU Length | 170mm |
10x HDD+ 3x SDD | Hard Disk Support | 2x HDD+ 2x SDD |
Tempered Glass Panel | | |
Type-C Support | |
ATX/M-ATX/ITX | Motherboard Support | ATX/M-ATX/ITX |
400mm | Max. GPU Length | 390mm |
160mm | Max. Cooling Height | 160mm |
200mm | Max. PSU Length | 200mm |
10x HDD+ 3x SDD | Hard Disk Support | 2x HDD+ 1x SDD |
Tempered Glass Panel | | |
Type-C Support | |
ATX/M-ATX/ITX | Motherboard Support | M-ATX/ITX |
400mm | Max. GPU Length | 330mm |
160mm | Max. Cooling Height | 165mm |
200mm | Max. PSU Length | 180mm |
10x HDD+ 3x SDD | Hard Disk Support | 2x HDD+ 1x SDD |
Tempered Glass Panel | ||
Type-C Support | |