1.Gain more range of motion in front axle
2.Improve off-road performance and gain traction
3.Linch pins keeps pins secure while still allowing for fast disconnect
4.Kit contains 2 clevis pins, 2 licnh pins, and 4 washers
INSTALLATION:
1. With your parked on level ground, unbolt your factory swaybar link bolts using a Torx55 bit and a wrench. You may reuse the washer.
2. Replace the factory bolt with the supplied clevis pin. Make sure to place supplied washers on both sides of the pin for a tight fit. Insert linch pin in
appropriate hole to secure clevis pin. You may re-use the factory washer if the fit is loose or to adjust the cotter pin.
As with any home modification to a vehicle, use these supplies at your own risk. Pin head may wear down with regular use. Pins should be checked
regularly for wear and tear from use and should be replaced regularly if necessary.