HOW TO SET THE FUNCTION OF ALARM DEVICE
- Switch the bike alarm on and off:
- connect the battery to power on, the red light flashes with the sound of ""DI"" automatically start;
- Take out the battery and shut down automatically, has memory function.
- The product is initially set to the disarmed state of the alarm mode, and the remote control has been paired.
- Press the sound switching button on the remote control to select the appropriate volume. Mute - Medium - 120db
- Press the arm or disarm button on the remote control to select the state. (The alarm will only be triggered if the alarm is triggered in the armed state alarm mode).
- How to set the alarm mode
- Press the disarm button on the remote control to set it to the disarm state.
- Press the gray mode button on the front of the alarm to switch the state. Alarm mode-flash mode-always on mode.
- How to set the vibration sensor sensitivity
- When the device is in the disarm state, press the remote control disarm key and assign key to enter the vibration sensitivity adjustment state. Press the arm key to increase vibration sensitivity. Press the SOS button to decrease (a total of seven adjustable levels, press the switch volume button and emergency button at the same time to exit the sensitivity setting mode).
- Set tilt alarm operation method:
- When the device is disarmed, select an installation angle (take horizontal placement as an example), short press the mode button until it is always on, press and hold the mode button for a long time, and a beep indicates that the tilt alarm function is enabled, and then short press the mode button to exit the constant light mode (At this time, it has been switched from the always-on mode to the alarm mode). In the alarm mode, when the device is tilted from the current angle greater than 45°, the device will start to alarm. If the tilt angle is always greater than 45°, it will alarm every 30S Once; when the tilt angle is less than 45°, the alarm stops.
- It is recommended to use seven levels of sensitivity , and the volume of 120bd (the initial setting is level 7).
- In addition to the remote control can set the arming and disarming status, the button on the back cover of the alarm can also be set (recommended to use the remote control to set). Please read the manual carefully for the setting method.
- It is recommended to use the tilt alarm function when riding a bicycle during the day, and to use the alarm mode in the armed state when parking.
- It is recommended to use the always-on mode in the disarmed state for cycling at night, and it is recommended to use the alarm mode in the armed state when parking.