Feature(may vary by option.)

●【IMPORTANT NOTE】Front and rear brake hoses are 2300mm (90.5in) long and can be cut to the length you need；the hoses are pre-filled with environmentally friendly mineral oil, no need to bleed to use；The front and rear caliper hose and control lever are separated for easy internal routing.
●【Product Features】Thickened rotor: thickness 2.3mm (ordinary rotor 1.8mm)；MT600 sintered metal brake pads: 34.7mm long，20mm wide，5mm thickness (ordinary：26mm long，15mm wide，3.9mm thickness), Hydraulic disc brakes are only suitable for e-bikes where the front and rear brakes are located on the left side.
●【KIT INCLUDES】Ebike hydraulic brakes (two 2300mm/90.5inch tubes, one set of brake levers, one set of brakes, two 2.3mm thick, 180mm diameter brake discs）Three mounting adapters and two sets of mounting screws, a pipe cutter and auxiliary accessories.
●【MANUFACTURING MATERIAL】CNC Manufacturing Process , three fingers iron handle, closed system . Caliper: CNC aluminum caliper (dual piston: use non-corrosive mineral brake fluid) Brake disc: high manganese 410 stainless steel. Fuel line: nylon + preparation yarn + PBT inner tube.
●【ELECTRIC INDUCTION CONTROL SYSTEM】Use detachable power-off sensor, the sensor receives a signal when braking and cuts off the power output of the motor to ensure safe riding, the cable length is 300mm (11.8in), Use 2-pin waterproof connector. 【Hint】Check the wiring port is matched.

[Black-Front2300mm & Rear2300mm]

[Red-Front900mm & Rear1700mm]

[Black-Front1000mm & Rear1850mm]

[Red-Front2300mm & Rear2300mm]

Description