Feature
●【Compatibled】Lower Steering Column Bearing fit for 1976-1979 F-ord Broncos 1973-1979 F-ord Trucks; Also for 66-72 Ford trucks and similar aged Ford vintage cars. This bearing can also be used with Steroids or similar power steering conversion kits for vintage Mustangs.
●【Installation】The lower steering column bearing can be installed with only minor modifications to the column tube - you will need to drill out three spot welds so you can remove all parts of the stock bearing and then the kit can be installed in its place. (Note: please confirm fitment by comparing with the dimensions given below.)
●【Specifications】Fits right side 2.125" OD for an exact snug fit in the column tube. 0.75" (shaft) ID, 0.625" depth. Comes with three 1/4-inch stainless steel screws and tapped mounting holes.
●【Material】The lower steering column bearing is made of high-quality aluminum alloy with a precision ground surface for a high fit to the column tube.
●【Service】If you feel you need further assistance in using our products, dont hesitate to contact us.
Description
Specifications
Fits right side 2.125" OD for an exact snug fit in the column tube. 0.75" (shaft) ID, 0.625" depth. Comes with three 1/4-inch stainless steel screws and tapped mounting holes.
MOTOQUEEN Lower Steering Column Bearing
Installation
The lower steering column bearing can be installed with only minor modifications to the column tube - you will need to drill out three spot welds so you can remove all parts of the stock bearing and then the kit can be installed in its place
