NOT NAIL RESISTANT Hitting a nail will often rip off one or more teeth
Recommend USE on cordless drill MEDIUM to HIGH SETTING set on SCREW SETTING for best results
Perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites.
NOT For STUCCO, use Blue Boar Stucco & Wood Tungsten Carbide Tipped TCT Hole Saws
The Blue Boar MEGA TCT hole cutters have an extra hard grade of tungsten carbide for the tips of the teeth, and a double gauge thick side wall and bottom plate for added strength and durability with even the toughest materials. The added strength of the hole cutter enables the use of deeper gullet slots for easier plug removal.
These TCT hole cutters are the toughest available for maximum performance on the job day after day and hole after hole. They will outperform and outlast dozens of ordinary self-feed bits (and without the mess) or bi-metal hole saws (without the time lost prying out the cut plugs). Use a single hole cutter for every material on the job site. The 2-1/4" cutting depth enables its use for cutting through strapping and joists without ship auger drill bits.
Quickly mounts to any standard hole saw arbor or with Hole Pro XL Arbor and ABS dust shields to trap the dust and shavings and control the cutting depth.