The Mopeka Tank Check LED Display

With the Mopeka Tank Check LED Display youll be able to wirelessly monitor the level of 2 propane tanks using your Mopeka sensors.

• The Mopeka Tank Check LED Display is a small display that mounts conveniently inside your dash or control panel
• It can connect to 2 Mopeka sensors and provides a tank readout indicating how much fuel is left
• Supports the original Mopeka Tank Check sensors or the newer Mopeka Pro Check sensors
• Supports reconfiguring the indicator for 20lb, 30lb, or 40lb tanks.
• The LED display and sensors works simultaneously with the Mopeka Tank Check App or the Mopeka Gateway

Installation is simple:

1. Hold one of the two buttons on your Display until the lights for that button start flashing (approx 5 seconds). Release button when lights start flashing.

2. Press and hold SYNC button on your Mopeka Pro Check sensor (up to 10 seconds) until the LED display lights stop flashing. The sensor is now synced with the display.

3. Repeat steps to sync the second sensor to the 2nd button/gauge of the display.

4. Both sensors are now sync’d to the display. Follow the instructions for each sensor when connecting to your propane tank.

Reconfigure Tank Size:

The tank size is automatically configured for 20lb tanks from the factory. This new model supports reconfiguring the tank size, allowing you to choose a tank size of 20 lb (5 gal), 30 lb (7.5 gal), or 40 lb (10 gal).

1. To change the size setting, hold the button of the scale you want to change for 10 seconds. (After 5 seconds lights will start flashing, as when syncing. But continue to hold button until lights change again.)

2. At 10 seconds, a single light will appear. Continue to hold button. The single light will scroll between red, yellow, and green. When the color corresponding to your tank size appears, release the button. Your tank size is now set.

• Red = 20 lb
• Yellow = 30 lb
• Green (3rd from top) = 40 lb
• Green (2nd from top) = 100 lb

Mopekas Sensor Lineup