Feature

●【Premium Material】The CO2 tank for soda machine adapter are made of high quality aluminum and brass. The high pressure hose is made of braided stainless steel. It has the advantages of anti-rust, anti-corrosion, wear resistance, anti-aging, not easy to deform, etc. And the surface is polished plating, very strong and beautiful. Working pressure meets 6000 psi with spring protector, the air tightness is improved and the problems of tube explosion and tube expansion are avoided.
●【Wide Applications】The external hose with standard Outlet Valve for CGA320 can be used in large CO2 storage tanks, like 5lb, 20LB or 50lb commercial CO2 tanks (Suitable for CGA-320 of these countries-United States, Canada, Brazil, Colombia, Philippines.) And fits for TR21-4 G1/2 thread soda maker machine at home. (NOTE: 1. Not suitable for newer Soda Machine. 2. Only treats gaseous CO2 and does not process liquid CO2. Liquid CO2 will make your drink taste bad.)
●【Light Weight Size】The hose length of adapter is 36 inch(90cm), and the weight is about 0.88 lb. Compare to other heavy ones, it is easier & quicker to install on machine and bottle.
●【Save Money】This machine CO2 adapter kit is easy to install and remove. It connects a large CO2 tank and Soda Maker for instant savings on soda clinder refill and allows normal operation without any permanent changes.
●You will get: 1pcs CO2 Tank Cartridges Hose with 2 dust-proof cover & 2 pcs gasket. Pls note that for better air tightness, please use a wrench to tighten the connection with CO2 storage tank, besides, If you find leak while this hose has been use for some time, may be the gasket was worn. Replace it with a new gasket.


Description

Features:
1. Made of premium braided stainless steel
2. Anti-rust, anti-corrosion, wear resistance, anti-aging
3. Working pressure meets 6000 psi
4. Suitable for large CO2 storage tanks, like 5lb, 20LB or 50lb commercial CO2 tanks
5. Lightweight
6. Easy to install & remove
7. Save money for CO2 refill

Specification:
Hose Material:Braided stainless steel
Adapter Material: Brass, aluminum
Length: Approx. 90cm / 36 in
Working pressure: 6000 PSI
Thread For soda maker: TR21-4
Application: Standard for CGA-320 large CO2 tank, like 5lb, 20LB or 50lb commercial CO2 tanks(Suitable for CGA-320 of these countries-United States, Canada, Brazil, Colombia, Philippines.)
Weight: Approx. 0.88lb
Package List: 1 pcs soda maker CO2 adapter hose, 2 pcs gasket

Instructions:
1.Screw the CGA320 Nut to large CO2 gas cylinder and tighten it by wrench;
2.Remove the black adapter from the quick coupler firstly,and screw it onto the soda machine by wrench,then connect the quick coupler;
3.Open the valve of the large gas bottle;
4.Done,you can enjoy your sparkling water.

If you want unscrew the pin valve from the machine:
1.Close valve of the large gas bottle;
2.Press button more serval time to drain residual Co2(if you disconnect the coupler directly without this step,the o ring in quick coupler will be blowed out);
3.Disconnect the quick coupler.

Note:
1.Dont use siphon tube Co2 Tanks!! Our unit works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.
2. About Air Tightness: The hose comes with two cushion ring, please use it during installation to prevent air leakage.
3. Please close the tank every time after making soda water, just like we use natural gas for cooking, so as to ensure that the gas in the tank will not leak!
4.Please use a wrench, Ensure the end connector for the TR21-4 is tightly connected to the soda machine（Tighten firmly), If the connection is not tight, The pins inside will not be triggered, May cause gas to fail to pass.
5.If your soda maker contains gaskets, When installing, No need to install gaskets for the TR21-4 connector.
6.Before installing your soda bottle to your soda maker machine, please press the air filling button for several times,this steps is to exaust the excess air in the hose, and then do the following Co2 filling process, in this way, the Co2 will be fresh, with best flavor.