Feature

●High Quality: High quality machined from steel or rubber with excellent mechanical and physical properties, this Socket shows its high tightness, corrosion resistance and durability
●Fits for 2003 - 2010 Ford Super Duty F250 F350 F450 F550; 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines.
●The IPR Valve fit for Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The IPR Commands The High Pressure Oil Pump That Fires The Injectors
●The IPR (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The IPR Valve O-Rings Are A Common Failure Point
●Used to Remove and Replace the Injector Pressure Regulator (IPR) on Ford 6.0L and Other Diesel Engines.


Description

Fitment: Fits for 2003 - 2010 Ford Super Duty F250 F350 F450 F550; 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines.

E-Series

2004-2010 Ford E-350 ---- 6.0L V8 Diesel Turbocharged

2004-2010 Ford E-450 ---- 6.0L V8 Diesel Turbocharged

Excursion

2003-2010 Ford Excursion ---- 6.0L V8 Diesel Turbocharged

F-Series

2003-2010 Ford F-250 Super Duty ---- 6.0L V8 Diesel Turbocharged

2003-2010 Ford F-350 Super Duty ---- 6.0L V8 Diesel Turbocharged

2003-2010 Ford F-450 Super Duty ---- 6.0L V8 Diesel Turbocharged

2003-2010 Ford F-550 Super Duty ---- 6.0L V8 Diesel Turbocharged

Function:

6.0 IPR VALVE SOCKET: Used to remove and replace the injector pressure regulator (IPR) on Ford 6.0L and other diesel engines.IPR VALVE SEAL KIT 3C3Z9H529A & AP0035: For use with AP63417, 1846057C1, 5C3Z9C968CA, W3250216 and HTV102 IPR Valve, found on 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles, such as 2004-2010 Ford E-350/ E-450, 2003-2010 Ford Excursion, 2003-2010 Ford F-250/ F-350/ F-450/ F-550 Super Duty.

Features:

1. High quality machined from steel or rubber with excellent mechanical and physical properties, this Socket shows its high tightness, corrosion resistance and durability.

2. Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused.

3. Used to Remove and Replace the Injector Pressure Regulator (IPR) on Ford 6.0L and Other Diesel Engines.

4. This is located in a very tight location. Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused.

Package included:6.0 IPR Valve Socket with Seal Kit