●CONSISTENT BENDING: This heavy-duty tool was created specifically for bending metal to create bracelets and bangles. Bend the wire to create round of oval cuffs, with perfect curves every time. No need for a mallet or hammer, the EZ bender takes gentle force to create your metal bracelet. ●MANDREL TOOL: Made of hardened steel these thick and sturdy bending tools are 7 inches long, 1 inch wide and 1.25 inches high. There is a 2-inch curve with a channel for bending metal blanks. The inside of the channel holds sheet metal and blanks in place while bending and can accommodate a maximum of 2.5mm thickness. ●EASY TO USE: To create a bangle or bracelet simply insert your straight metal blank into the open channel. Following the curve, push the metal along the curve of the tool. Stop when you get to the end of the curve on the bender. Flip the metal blank and repeat the same steps. Look at you - youve created your first cuff! ●CUSTOM CREATONS: The EZ bender is the perfect way to curve metal bracelet blanks to the size you need. Use our aluminum, brass and copper blanks to mold the cuff to a shape that best fits you. Use our Metal Elements stamping collection to get creative and make one-of-a-kind metal jewelry, custom wedding favors as well as original keepsakes. ●THE BEADSMITH - 40 years in the making! 💎 Trusted to bring you the best quality beads, tools, and supplies. Making jewelry should be a positive experience. Let us join you in the creative journey. Our experts are here to help. Your satisfaction is important to us. Contact us with any quality issues or concerns.
Description
Easily bend your blanks into cuffs without a mandrel or mallet!
Design your metal bracelet blanks any way you want with ink and stamps then use this handy tool to bend it into cuff form.
Mix and Match Thin Cuffs
Thick Cuffs Make a Statement
Tinted with Alcohol Ink for Flair
First, pick a bracelet blank and stamp it!
Preparation
Pick a metal bracelet blank that you want to stamp and set up your work station with the necessary tools: bench block, stamps & brass head hammer.
Planning
Make sure to place it on your blank leaving room for all of your design. (Remember you are bending the ends approximately 1.5-2" so plan accordingly!)
Action
Use a brass head hammer and give the stamp one nice hard strike. This will ensure that the stamp leaves a good impression on the metal and is easy to read.
Define
Repeat steps 2 &3 to complete your design. Use a black marker to darken the design area, then wipe with a soft cloth leaving behind only the ink in the impression.
Now it is time to bend your blank into a bracelet!