Feature

●In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
●Full closed-loop control technology. Fast and accurate response to control engine speed
●It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
●The speed controller is a closed-loop control of the entire electronic design, its instantaneous load changes quickly and with precision control in response to engine speed when connected to the match and the implementation of e-speed magnetic sensor signals can be Control of a wide range of engines
●It is designed to be highly reliable, the engine can withstand the surrounding area within the range of electromagnetic interference


Description

Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40to +85
Temperature Stability: Better than ±0.5% over temperatures of -40to +125
Mechanical Vibration: Withstands the following vibration without failure or degraded performance: 0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Electronicfuelcontrol (EFC)
SPECIFICATION:
RPMStability:
<;±0.25%
SpeedRange:
1KHz~6.5KHz
ThermalStability:
Max±0.7%
IDLERegulation:
260±20Hz
DROOPRegulation:
Minimum15Hz±6Hz/1Amp
Maximum:400Hz±75Hz/1Amp
ExternalSpeedRegulation:
±200Hz(with1Kconnected)
AUXInputSensitivity:
148Hz/1V.,±10Hz
Impedance:
1M
WorkingTempRange:
-40~85°C
ENVIRONMENT:
WorkingHumidityRange:
Maximum95%
StockingTemp:
-55~92°C
Shocking:
20-100HZ500mm/Sec.
INPUTPOWERPROVIDE:
Voltage:
24V
GroundingPole:
Negativepole
PowerProvide:
40mA
ActuatorContinuousCurrent:
Minimum1A,Maximum4.5A
MPU:
Signal:
2~120VRMS
NOTE:Above-Mentioned parameters are tested with a 3800Hz working frequency.