[1]

GRIPSEAM is a superior adhesive suitable for use inside and out, in all weather conditions. Has excellent bonding properties even on wet surfaces. Rapid cure time even at low temperatures. Remains fully elastic. APPLICATION Ensure all surfaces are clean and free from dust, grease, oil or any other contaminants that may hinder adhesion. Carefully cut the tip of the cartridge, taking care not to damage the threaded area. Screw on the “notched” nozzle and place cartridge in a standard sealant gun. Apply the adhesive directly from the cartridge onto the seaming tape. Use a serated trowel to spread evenly. Weight the joint to ensure a flat, even joint. Join the artificial grass and allow to dry for a few minutes. Full cure will take approximately 24 hours. COVERAGE On a typical seam, one cartridge should cover approx 3 linear metres of jointing tape. Perimeter stick to solid surfaces of concrete/wood etc one cartridge should cover approx 5 lineat metres STORAGE CONDITIONS Store in original, unopened cartridge, in a cool, dry place at a temperature between +5C and +25C. DISPOSAL Do not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations. HEALTH & SAFETY Please refer to separate material safety data sheet for full handling, use and storage instructions. Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice. Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability.