Smartbuy All-purpose (Engineering Waterproof Special) Silicone is an ultra-high performance, one-component neutral silicone caulking agent, it can be used in any environment, and quickly becoming tough and elastic silicone rubber with reaction of moisture in the air.
Product Name: Smartbuy All-purpose silicone sealant (Engineering Waterproofing)
Main ingredient: Silicone rubber
Concrete: Single component, neutral, moisture-curing, suitable for solar panel frame, daylighting shade, wave plate, glass, water plug, aluminum door and window combination, glass brick caulking, concrete, marble, ceramic tile, ceramic, floor tile and most of the building materials.
Instructions for use:
1. Can not be used on surface with ooze grease, plasticizers or solvents.
2. Can not be used in airlessness places.
3. Can not be used in an environment that is continuously immersed in water.
4. Can not be used on frosted or wet surfaces.
5. Can not be used for food packaging.
Attention:
1. Remove dust or oil on the surface and keep it dry.
2. To keep the construction surface clean, it is recommended to use masking tape.
3. Cut off the neck of the pipe, attach a sharp mouth and cut an appropriate caliber.
4. Punch the caulk into the joints and level them with a spatula.
5. It takes about 5-10 minutes to dry and 24 hours to complete curing, depending on temperature and humidity.
Precautions:
1. Please keep in a dry place and avoid direct sunlight.
2. Avoid contact with eyes, if accidentally touched, please rinse immediately and seek medical attention.
3. Please stay away from the reach of children.
4. In case of skin contact, wipe with a towel or cloth, then flush thoroughly with water.
5. Construction temperature 5°C∼40°C (41°F~104°F).
6. The temperature range after curing is -40℃~180℃ (-40°F~356°F).
Shelf life: Store under 5°C∼25°C (41°F~77°F) for 12 months
Specification: 10.1 Fl oz (300ml)