Feature

●Increase the power supply anti-reverse function.Adopt photoelectric isolation input and output to enhance anti-interference ability.Set the parameters after powering for the memory forever.The signal terminal voltage signal can be kept for a long time. Ensure stability, industrial grade board, PLC grade.
●After booting, press and hold K1 for 2 seconds to enter the selection function mode, from P1-1 to P1-4 can be selected. P1-1 working mode please see the description below.
●P1-2 working mode: the start timing of the signal trigger X time when the relay pulls in Y to disconnect. The user can set the time for the relay to pull in X and Y; the time setting is similar to P1-1. The blue light is on to indicate the time when the relay is turned off, and the blue light is off to set the time when the relay is disconnected.
●P1-3 working mode: turn on X seconds, disconnect Y seconds, infinite loop. The user can set the time X, Y of the relay pull-in; the time setting is similar to P1-2. Short press K1, you can enter the fine adjustment settings of the function, first turn on X, turn off Y seconds, press K1, first disconnect X, turn on Y seconds, then press again to repeat the default first setting.
●P1-4 working mode: the signal triggers the relay to pull in but does not start timing, the trigger signal disappears and starts timing T. When the time is up, the relay is turned off; during the delay, the signal is given again, the delay is cancelled, the suction is kept, and the signal disappears. Restart the timing; (equivalent to the start of the button release, often used for power-off delay). The user can set the time T for the relay to pull in; the time setting is similar to P1-1.


Description

Specifications:
Size: 64.2* 34.8* 18.5mm/2.52*1.36*0.72inch
Relay specifications: AC 220V 10A or DC 30V 10A
Static current: 20mA, working current: 50mA
Working voltage: 12V [10-16V]
Trigger signal: 12V signal voltage 4V ~ 20V
Life expectancy: about 100,000 times, working temperature: - 40 ~ 85 °C

P1-1 working mode:
the signal triggers the relay to pull in. When the time is up, the relay is disconnected. The user can set the time T of the relay to pick up, press the K2 hundred digit digital tube to start flashing, press K3 at this time, the hundred digits change. Press K2 ten digital tube to start flashing, press K3 at this time, ten digits change; press K2 digit digital tube to start flashing, press K3 at this time, the digit value changes; press K2 again; digital The tube is no longer flashing. At this time, press K3, the decimal point is shifted. The decimal point is 0 to 999 minutes in the ones digit and 0 to 99.9 seconds in the ten digits. There is no decimal point indicating 0 to 999 seconds. After the selection is completed, the time is set. Short press K1 to enter the fine adjustment setting of the function. The trigger is invalid during the default delay. Press K1, the trigger is valid during the delay (re-timer), press K1, reset during the delay (time off, relay reset), Press again to repeat the default first time setting.

Package Includes: 1Pcs