Feature
●【OE Replacement】Before purchasing this Temperature Sensor, Please check the details to confirm compatibility. Replace 37880-PLC-004, 158-1078, ATS39, 15-50319, SU5588, TS5615, 779-19074, TS41011, 5S1050
●【Compatible with】Replacement for ACURA MDX RSX TSX HONDA ACCORD CIVIC CR-V ELEMENT FIT S2000 Compatible OEM part number：37880-PLC-004, 158-1078, ATS39, 15-50319, SU5588, TS5615, 779-19074, TS41011, 5S1050
●【OE Quality】Hisport Temperature Sensor Air Charge Temperature Sensor 37880PLC004 Compatible with Acura MDX RSX TSX Honda Accord Civic CR-V Element Fit S2000 37880-PLC-004 158-1078
●【High precision thermal】The thermistor on the sensor senses the temperature rise and fall, the ECU obtains temperature information through voltage changes and controls the temperature by adjusting the ratio of cold and warm air
●【Year Warranty】When you encounter any problems during use, please contact us for after-sales service.
Description
Hisport Temperature Sensor is manufactured in accordance with OEM specifications and high-quality material. All products abroad have undergone manual quality inspection to ensure the high-quality of appearance and function
Installation location of intake air temperature sensor
The intake air temperature sensor is usually on the intake hose or the airflow sensor after the air filter. In the picture, mark 1 is a fastening screw, mark 2 is an intake air temperature sensor
Working principle of intake air temperature sensor
The intake air temperature sensor uses a thermistor with a negative temperature coefficient as the detection element. In order to accurately measure the intake air temperature, a plastic case is usually used for protection to prevent the temperature of the installation site from affecting the working accuracy of the sensor.
The resistance of the thermistor decreases when the temperature increases, and increases when the temperature decreases
Typical car circuit connection
The engine control unit (ECU) provides a 5V reference voltage for the sensor 3 terminal, and the sensor 1 is grounded inside the ECU
Intake air temperature sensor detection method
1. Turn off the ignition switch, disconnect the intake air temperature sensor harness connector, and remove the intake air temperature sensor
2. Put the intake air temperature sensor into the water for heating
3. Use the resistance profile of a multimeter to measure the resistance between the two ends of the sensor
