●REPLACEMENT PART NO.: 2344587, 05149171AA, 68144248AA, 56041698AA,5S7084, 25024253, SG1849, 23159,Directly Fit your vehicle when the plug and the length is the same as your sensor. ●FITMENT:Compatible with Chry 300,Town & Country,Aspen, Pacifica,PT Cruiser, Sebring | Dodge Avenger,Caravan,Challenger,Charger,Dakota,Journey,Magnum,Nitro,Ram ,Stratus | Jeep Commander,Grand Cherokee, Liberty,Wrangler | Mitsubishi Raider | Volkswagen Routan. Please enter your specific model above. ●MATERIAL: Using high-temperature materials, the reaction speed is faster. The unique dual laser welded stainless steel housing can be completely immersed in water and sealed to ensure a longer sensor life. ●PERFORMANCE: The oxygen sensor uses sophisticated sensing elements to produce an accurate output proportional to the air-fuel ratio, which helps the engine to continuously and effectively monitor and run, while maximizing performance ●FUNCTION:The layer protects,and the trap layer s damage to the platinum electrode. Measure the oxygen content after combustion, convert it into a voltage signal and send it to the engine computer to realize the closed-loop control of excess air coefficient
[234-4587]
Description
Advantages of BLPextrm O2 Sensor
Low power consumption(7watt)
Adapt to high temperatures (vent at 1000 ℃)
Multilayer ceramic belt structure with integral heater.
The very short activity time (<15 seconds) Speed up the Cold Start.
There is no need to adjust and repair the oxygen sensor, just replace the same type of oxygen sensor.
Step 1. Confirm the BLPextrm oxygen sensor according to your car model, year, engine.
Step 2. Follow the electrical wire away from the sensor, disconnect it and the O2 sensor.
Step 3. Thread the BLPextrm sensor into place and making sure it threads properly and smoothly. Some models are generic which just different in appearance.
Step 4. Tighten the o2 sensor and reconnect the electrical wire.
Step 5. Use the detection tool to detect the operation and clear the fault code.
Can I replace the oxygen (O2) sensor by myself?
Yes. However, it is better to let a professional technician help you replace the oxygen sensor to better maintain your cars discharge system.
What might be the problem when my check engine light comes on?
This may be due to damage to the sensor probe, damage to the sensor body, internal failure of the sensor, external electrical failure or other problems.
Why is the fault indicator on?
If the fault indicator is on, it does not mean that the sensor is faulty. Different trouble codes mean different situations. Please judge the code carefully and find out the real problem.
Can the BLPextrm OE O2 sensor help my vehicle maintain discharge performance?
Yes. The BLPextrm OE oxygen (O2) sensor can help the on-board computer on the vehicle adjust the discharge ratio to maintain good discharge performance.