Feature(may vary by option.)

●【Main Usage】As a fuel Injector tester cleaner Tool,When the injector is clogged, you can use it to save expensive nozzles,our fuel injector tester may be used with any fuel pressure gauge/ tester. Injector tester is powered by 12V battery or an external DC 12V (recommended at least 1.5A) power adapter. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in cleaner bottles, then through injector to clean it.NOTE: Gasoline car only, NOT the diesel engine.
●【8 Pulse Modes】fuel injector pulse tester is designed with 8 pulse modes:High/Low power drive modes with Short/ Medium/ Long/ Continuous pulse modes,help to identify injector problems such as sticking,leaking,clogged,damaged or burnt injector.
●【4 Injector Cleaner Adapters】 The fuel injector tester cleaner kit is equipped with 4 white tube adapters (2 big and 2 small)for connecting the injector nozzle and car cleaning liquid flush. These two fuel injector cleaner adaptor fits 2 different size fuel injectors and can easily clean almost all types of car motorcycle fuel injectors( except Cylinder Direct-Injection Nozzle ).
●【Can Test 2 Injectors at the Same Time】Compared with other injector cleaning kit on the market that can only test 1 injector, our injector tester has a special four-wire dual-channel design which can test 2 injectors at the same time(new and old injectors can form a sharp contrast).
●【3 Years Warranty and Lifelong Maintenance】For the damage caused by non-human factors, VKALTUL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.

[Normal edition]





Description

fuel injector testerfuel injector tester

VKALTUL fuel injector cleaning kit is deigned with short circuit Alert and power input reverse connection Alert function. When the fuel injector damaged or short circuit of the pulse output terminal, the power indicator light of the fuel injector tester will flash.

fuel injector cleaner kitfuel injector cleaner kit

Our fuel injector tester power cord is up to 40 inch / 100 cm and its test lead is 20 inches / 50 cm, which is more convenient to use. The wires are made of superior silica gel, which has better high and low temperature resistance.

injector testerinjector tester
Fuel injector cleaning toolFuel injector cleaning tool
fuel injector tester kitfuel injector tester kit

Four-Wire Dual Channel Design

Compared with the two-wire single channel design injector cleaners on the market,injector tester can test a single injector,but also supports testing two injectors at the same time (new and old injectors can form a sharp contrast), which better helps you identify the condition of the injector.

fuel injector cleaner kit toolfuel injector cleaner kit tool

Equipped with 4 Injector Cleaner Adapters

For connecting the injector nozzle and car cleaning liquid flush.,these 4 fuel injector cleaner adapter fits 2 different size fuel injectors and can easily clean almost all types of car motorcycle fuel injectors( except Cylinder Direct-Injection Nozzle ).

auto fuel injector cleanerauto fuel injector cleaner

OPERATING INSTRUCTIONS:

1. Turn off the cars engine.

2. Remove the wire plug of the vehicle injector to be tested, and then connect the two pulse output terminals of the fuel injector tester to the vehicle injector.

3. Then connect the red clip of the injector tester to the positive terminal of the 12V car battery, and connect the black clip of the injector tester to the negative terminal of the car battery.

4. Insert the DC plug into the port of the fuel injector tester.

5. Press MODE SET key to select the desired pulse signal output mode, and the screen will display the currently selected mode.

WARMLY NOTE:

When using the fuel injector tester cleaner, please do not expose the cover and plastic housing to cleaning agents to avoid damage.

Product information