Introducing our V2 Extension Clamp TRI-PACK, a refresh to our V1 model along with the addition of two more lengths. The Tite-Reach Extension Clamp has quickly become a great tool for every toolbox. Weve all been in those frustrating spots where your hand cant quite reach or where you have to wait for a hot muffler or radiator to cool off before you can reinstall a bolt. Along with solving these problems, the Extension Clamp will also save you time by not having to remove other parts on your equipment to get into a tight spot. Along with getting the standard mid-length 10.5" V2 extension clamp in this pack, you also will be receiving two additional V2 models called the "MINI" and the "MAX". The MINIs overall length is 7.5" and the MAXs overall length is 14.5". This pack gives you more flexibility than ever before when using an extension clamp! Our V2 clamp jaws open to 1 5/8"wide, which is over 30% wider than our V1 extension clamp. The jaws also stand roughly 35% taller than our V1 extension clamp, increasing the users ability to keep a tight hold on whatever they are fastening. You will also notice light knurling on both jaws on the V2, another improvement that increases its overall grip. The extension clamps vice-like design also ensures you won’t drop the part it’s holding until you loosen the tension nut. This means unlike a pliers, you do not need to maintain tension to keep what you’re holding in place. This is very valuable when you’re in a difficult spot where if you drop what is “clamped” it will be gone. Our extension clamp has been used in everything from auto body to airline maintenance and is a great option for anyone’s toolbox.