Feature(may vary by option.)

●【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required.
●【Checking】Check that the thread and pitch of the tap and the bolt match.
●【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil).
●【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break.
●【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals.

[M10 x1.0mm]




[M10 x1.25mm]





Description

JoyTubeJoyTube
35 Pcs Thread Repair Kit35 Pcs Thread Repair Kit

Thread Repair Insert KitThread Repair Insert Kit
Package Included:

  • 30 × Thread inserts
  • 1 × Tang breaking tool
  • 1 × Installation tool
  • 1 × wrench
  • 1 × Thread tap
  • 1 × Drill bit

  • Instructions:
  • 1.Drill out damaged thread using correctly sized drill bit(supplied)
  • 2.Tap re-drilled hole using tap supplied
  • 3.Load coiled insert into applicator
  • 4.Screw coil into casting
  • 5.Using lug breaking tool, break off tag on insert
  • 6.Thread is repaired and ready to use

JoyTube 35 Pcs Thread Repair Kit

Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

Increase connection strength and fatigue resistance due to the elasticity of wire thread inserts.

The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs.

Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged.

Thread tapThread tap

Thread tap Installation toolThread tap Installation tool

Breaking ToolBreaking Tool

Screw Taps

High-Speed steel material, will much better and harder than normal steel. High Carbon Steel Construction for Durability.

Installation Tool

Place insert on installation tool, position the adjustable ring, and fits each insert snugly into position.

Breaking Tool

After finishing installation and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones.

Product information