●Fits most 1 3/8" and 1 1/2" tub drains, if your drain cross bar is badly corroded, it may not be suitable, then you possiblely need a tub drain extractor ●Better used combination with adjustable wrench or screwdriver ●Suitable to be used to install and remove tub drains and spuds, your helpful plumbing tool kit ●Heavy duty die-cast aluminum construction, durable; rust free & wont scratch the bathtub surface ●Dual ended tub drain remover tool ●Product dimensions: the small ends diameter is Φ1.3 /3.3cm and large ends diameter is Φ1.42/3.6cm and Φ1.77/4.5cm(operational teeth depth is 0.35"/0.9cm), respectively. Contact us with any questions or concerns ●Instructions for use: 1, select correct end of tool for the tub drain, and the small end of the wrench is used for bath tub drains. 2, insert the tool into the drain. 3, insert screwdriver into the tool or adjustable wrench around body of the tool. 4, turn counterclockwise to remove the drain; turn clockwise to tighten the drain
Description
How to use tub drain wrench
1
Select correct end of tool for the tub drain
The small end of the wrench is used for 1 3/8" and 1 1/2" bath tub drains
2
Insert the tool into the drain
3
Insert screwdriver into the tool or use an adjustable wrench to turn
Turn counterclockwise to remove the drain
Turn clockwise to tighten the drain
4
Job done
Detailed size information for tub drain remover tool
The small end fits 1 3/8" and 1 1/2" tub drain
The following types of drain may not fit, please make sure your drain size is applicable before purchasing
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.