Contents:
1 x Leather Cleaner Mild, 125 ml / 4.2 us fl oz 1 x Leather Protector, 150 ml / 5.1 us fl oz 1 x Cleaning Sponge 1 x Cleaning Cloth.
Always check all products for changes in a concealed place first!
The Leather Cleaner Mild is filled in a practical foam dispenser bottle. Foams clean more effectively than liquid cleaners, consumption is considerably lower and the leather does not get too wet, which can otherwise lead to hardening after drying.
Always check all products for changes in a concealed place first! Put the cleaning foam on a sponge. Do not apply directly to the leather. Clean the leather from seam to seam with the foam. Repeat the process several times if necessary. Remove dirt and cleaner residues with a damp cloth, then allow to dry.
As a rule, leather should be cleaned thoroughly if it is dirty. Use Cleaner Mild for normal soiling or Cleaner Strong for extreme soiling (barn finds, etc.). This prevents dirt from sticking to the leather due to the colour freshening and care. The COLOURLOCK Leather Cleaning Brush facilitates the work with heavy soiling in the depths of the grain. After cleaning we recommend to care for the leather.
With older leathers, stains also soak into the leather, or supposed dirt is colour damage. Such stains cannot always or not at all be removed with the cleaners. In such cases, use Leather Fresh to correct the colour or seek professional advice.
Leather Protector is applied when the leather has dried after cleaning. Rub a little Leather Protector into a soft cloth and apply thinly and evenly from seam to seam and allow to dry without buffing. One application is usually sufficient. Repeat the process only on extremely dry leathers that are highly absorbent. For stressed surfaces (heavy use or on heating or in the sun area), re-care every 3 months and normally stressed leathers every 6 to 12 months.