[Pen Press]
[Pm-002 & Mt2+trim-001+int-001]
[Trim-001]
[Bmw-pm-002 & Mt2]
The lathe mandrel kit is designed for producing pens. It includes a 7mm drill bit, mandrel, and live mandrel saver. The live mandrel saver allows you to attached the pen mandrel to your tailstock without over-tightening or under-tightening. It slides through the center bore in the live center nose, so mounting adjustments are fast and super secure.
|
|
|
|
---|---|---|---|
Easy InstallationThe pen mandrel slides through the center bore in the live center nose, so mounting adjustments are fast and super secure. |
Quick TightenThe live mandrel saver allows you to attached your pen mandrel to your tailstock without over-tightening or under-tightening. |
Sturdy and DurabllityThe shaft is made by hardened stainless steel for durability and smooth operation. |
7mm Drill BitSupplied with drill bit for drilling 7mm holes. |
A clever tool used on any of the projects tubes to both clean out any excess glue and to square up the ends of the barrel.
|
|
|
---|---|---|
Various occasionsThe pilot shafts are suitable for mounting into a drill chuck, lathe chuck, drill press or hand drill... |
Easy to cleanThe cutting shafts can easily clean and remove the extra glue, bits of wood, impurities, etc. from the tubes and make the tube cut flatte |
Suitable sizeThe pilot shafts contain the diameter of 6.2mm, 7.2mm, 8.6mm,9mm. |
It could Insert your glued pen tubes into your pen blanks the easy way with this tapered, chrome plated, glue resistant tool.