Feature(may vary by option.)
●Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
●Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
●Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
●6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
●Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
[Black Cobalt M4]
[Black Cobalt M3]
[Black Cobalt M8]
[Black Cobalt M6]
[Imperial 6pcs]
[Black Cobalt M5]
Description
Tips and Safety Cautions
- Is suggested that the combination drill and tap bit is used on a tapping machine with drill lubricant.
- If you apply an electric hand drill, please pay attention to your operation to avoid excessive shaking and tilting which may break the bit.
- Please keep the workpiece stable and the drill bit vertical.
6PC Fractional Inch Combination Drill and Bits Set
Drill and tap at the same time in one operation
These drill taps are a great time-saving accessory.
Each one is a combination of a twist drill bit and a tap. The point is the same as a twist drill bit, which is self-centering. So, you dont have to buy a centering drill bit or a center punch. Now you can drill and tap at the same time in one operation.
No tool changes, good alignment and fast cycle times make this a very productive tool.
- Offered in a set of 6 different fractional inch sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16” and 3/8”.
- Made from high-speed steel, combination drill and tap bits are mainly designed to tap up to 10-gauge wood, plastic.
- Theyre occasionally can be used on soft metal sheets. Not suitable for drill and tap in hard metals.
- Suggested Tapping Material Thickness: Less than 5mm
Key Features
|
|
|
|
|---|---|---|
135° Split PointThe 118° split point drill bit with 2 cutting edges and twist flutes are made for improved drilling speed |
Twist Drill Bit BodyHeavy-duty, fully ground body construction. High flow spiral design for the fastest removal rate and for thick material. |
Hex Shank1/4" hex shank allows for quick release to improve your work efficiency. |
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
|
|
|
|
|
|
|---|---|---|---|---|---|
| 6PC 2-in 1 Tap Drill Bits | 6PC 2-in 1 Tap Drill Bits | 6PC 3-in 1 Tap Drill Bits | 6PC 2-in 1 Tap Drill Bits | 6PC 3-in 1 Tap Drill Bits | |
|
|
|
|
|
||
| Customer Reviews |
563
|
563
|
563
|
563
|
563
|
| Price | $12.89 | — | — | — | — |
| Measurement System | Fractional Inch | Metric | Metric | Metric | SAE |
| Metrial | High Speed Steel 4341 | High Speed Steel 4341 | High Speed Steel 4341 | M2 Steel (High Speed Steel 6542) | High Speed Steel 4341 |
| Sizes | 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" | M3 M4 M5 M6 M8 M10 | M3 M4 M5 M6 M8 M10 | M3 M4 M5 M6 M8 M10 | 6-32NC 8-32NC 10-32NC 10-24NC 12-24NC 1/4-20NC |
| 1/4" Hex Shank | ✓ | ✓ | ✓ | ✓ | ✓ |
| Functions | Drill, Tap | Drill, Tap | Drill, Tap, Countersink | Drill, Tap | Drill, Tap, Countersink |