Feature

●Replacement for Tacoma 2.7L 1995-2004, Tacoma 2.4L 1995-2000, T100 2.7L 1994-1998, 4Runner 2.7L 1996-2000
●Make vehicle starts more easily, improved throttle response time and run more smoothly
●Unburnt gases or otherwise wasted exhaust gases that can be used to heat the air/fuel mixture. This adds to fuel economy and also aids in boosting horsepower
●Made of premium material for long-lasting durability and high-temperature resistance
●Comes in a sealed package, ready to install


Description

Easy Installation.Easy Installation.

check carefully the fitment guidecheck carefully the fitment guide

25620-7505025620-75050

Features:

Includes stainless steel gasket to ensure complete replacement.

Convenient to use, low consumption.

Easy Installation.

Notes：

Before purchasing, check carefully the fitment guide, part number and compare pictures provided with your old item.

Part Numbers:

EGV943

25620-75050

for 1995-2004 Tacoma EGR Valvefor 1995-2004 Tacoma EGR Valve

EGR valveEGR valve
EGR valve:

It connects the exhaust manifold to the intake manifold and is controlled by either a vacuum or a built-in electric step motor. Control the flow of exhaust gas being recirculated depending on the engine load.

Replacement for:

for 1995-2004 Tacoma EGR Valve 2.7L 3RZFE

for 1995-2000 Tacoma EGR Valve 2.4L 2RZFE

for 1994-1998 T100 EGR Valve 2.7L 3RZFE

for 1996-2000 4Runner EGR Valve 2.7L 3RZFE

The EGR valve begins working once the engine has startedThe EGR valve begins working once the engine has started

How Does an EGR Valve Work:

EGR systems recycle a portion of the exhaust gas back into the combustion chamber, where it combines with fresh intake air.

The EGR valve begins working once the engine has started, attained the correct operating temperature and the vehicles speed increases. Gradually, the EGR valve regulates the flow of exhaust gases.

Once the vehicle slows down and the engine stops, the EGR valve will return to its closed position and prevent the flow of exhaust gases.

Pull out the vacuum tube;Pull out the vacuum tube;

Installation Instructions:

Pull out the vacuum tube;

Remove the clamp and pull out the cooling pipe;

Pull out the outlet pipe, which is connected with the differential pressure sensor;

Loosen the EGR intake end retaining nut;

Loosen the EGR valve fixing nut, take off the EGR valve on the vehicle, pay attention to take off the gasket; in some vehicles, the gasket will stick to the cushion, and it must be cleaned;

Take out the new EGR valve and gaskets, put on the EGR inlet end first (Do not tighten the EGR intake end retaining nut), and tighten the EGR valve fixing nut first;

Then tighten the EGR intake end retaining nut ;

Pull in the outlet pipe;

Plug in the cooling pipe and put on the clamp;

Plug in the vacuum tube.

1 x EGR Valve1 x EGR Valve

Package Includes:

1 x EGR Valve

2 x Gaskets

Product information