Feature(may vary by option.)
●Diameter(Before Shrinking): 11mm / 0.43"; Flat Width: 17mm / 0.7"; Length(approx.): 10M / 32.8ft; Shrink rate: 2:1.
●Operating Temperature: -55 to 125 Degree Celsius
●Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
●Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
●Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.
[13mm Blue]
[11mm Green]
[13mm Yellow]
[10mm Yellow]
[13mm Clear]
[14mm Red]
[11mm White]
[13mm Black]
[14mm Yellow]
[14mm Green]
[14mm White]
Description
Features:
- Corrosion Resistance
- Good Electrical Insulation
- High-strength Toughness
- High Temperature Resistant
- Waterproof Resistant
- Long Service Life
How To Use:
1. CHOOSE THE RIGHT SIZE TUBE. Measure the diameter of wire/cable you want to wrap, make sure the diameter is equal to the size of heat shrink tube , because the tube will shrink up to 1/2 of original diameter after heating.
2. WRAP THE WIRE WITH THE TUBE. Cut out the length you need, wrap the wire with the tube, use a lighter, hair dryer or heat gun to heat the tube.
3. HEAT THE TUBE UNTIL THE WIRE IS WRAPPED TIGHTLY.
Specifications:
Material: Polyethylene
Shrinkage rate: 2:1 ( will maximum shrink to 1/2 of its supplied diameter )
Minimum Shrinkage Temp: +70 Degree Celsius
Full Shrinkage Temp: +125 Degree Celsius maximum
Operating Temperature:-55 to 125 Degree Celsius
Rated voltage: 1000V
Dielectric strength: 1 KV
Item Shape: Round/Flat