If your computer cannot sleep. - The computer cannot sleep or continues to sleep (black screen).
- If you find that the computer randomly goes into sleep mode with changes in the opening angle.
- Here can help you solve the problem. The screen does not have any quality issues.
|
If your computer is black screen - What you need to do is adjust this screw. This is a magnet, and the sleep induction line determines whether it starts sleeping based on the size of the induced magnetic force.
- It can rotate, and usually we adjust this magnet clockwise.
- Turn it all the way clockwise.
- Then install the screen.
- Test.
- If not satisfied, make slight adjustments clockwise or counterclockwise.
- Continue until the screen starts sleeping at an appropriate angle.
- Or wakes up at an appropriate angle.
|
Here is the solution. - When you install the screen, if it doesnt work,
- dont immediately assume that there is a problem with the screen. Most of the time, its because the position of the magnet is not suitable.
- You can determine your rotation direction by looking at the pointer on the magnet.
- Before leaving the factory, we rotate the magnet to what we believe is the correct position based on experience.
- However, We cannot confirm 100%.Therefore, once you learn how to adjust it, you can solve this problem.
|