Feature(may vary by option.)
●PTFE film tape: Using high performance polytetrafluoroethylene (PTFE) film made from 100% virgin PTFE resin as base material.
●Adhesive tape: This tape offers an extremely low coefficient of friction, in combination with a pressure sensitive silicone adhesive, creates a smooth, non-stick surface over a variety of substrates to assist in the movement of materials in many types of lay-flat applications.
●Skived film tape: This heat resistant tape can handle high temperatures up to 260 deg. C. This ensures no molten plastics sticking to the PTFE film tape which is handy when wrapping rubber laminating rollers on hot extruders and plastic extenders.
●Utility: Please clean up the surface before using the PTFE film tape. The abrasion resistant, pressure-sensitive tape finds common use in wrapping angle, bars, and guide rails.
●Application range: 1.For roll wrapping of polyethylene laminators (Suitable for laminations made in a relatively short amount of time or for thin laminates as changing tapes is simple).2.For endless belts of polyethylene laminators (Time for changing tapes upon dimensional change of laminated products can be shortened by making a double-layered endless belt by bonding the adhesive sides with this PTFE film tape).
[0.1mm T*25mm W*36yards L Red]
Description
Key Characteristics
1. Non-stick PTFE film provides a slippery and anti-friction surface.
2. Silicone adhesive provides clean removal with no residue.
3. Outstanding chemical resistance and inertness.
4. High temperature resistance to 260℃.
5. Dielectric insulation properties.
6. Good wear resistance.
Specifications
1. Adhesive: Silicone
2. Base: single surface specially oriented high-strength PTFE film
3. Thickness:0.1mm
4. Width: Max 300mm(Please contact us if need to customize)
5. Continuous Working Temperature: -70°C to 260°C
Applications
1. For roll wrapping of polyethylene laminators (Suitable for laminations made in a relatively short amount of time or for thin laminates as changing tapes is simple).
2.For endless belts of polyethylene laminators (Time for changing tapes upon dimensional change of laminated products can be shortened by making a double-layered endless belt by bonding the adhesive sides with this PTFE film tape).
3. Wrapping and insulation connection of high temp. and high voltage cables
4. Wrapping web rollers to reduce friction
5. Covering web former edges to minimize friction during folding
6. Noise reduction of parts where surfaces rub together