[3]
[6]
[7]
YTFGGY High Temperature Heat Resistant Tape are Made from polyimide film with silicone adhesive. The heat transfer tape are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 260°C (500°F).
Heat Tape 100% brand new and No brittle after heating. Easy to stick and no residue after peeling off. High Insulation, high temperature resistance, acid and alkali-resistance, low electrolysis. Perfect for using in electronic products, soldering and circuit boards.
✔ Heat Transfer Print
✔ Lithium Battery Packaging
✔ Electric Motor
✔ Auto Sensors
✔ Insulating circuit board
✔ Fiber Optic Cable
✔ Electrical circuit
✔ Wave Soldering
✔ 3D Printer
Specifications:
Substrate material: Polyimide polymers film
Glue Type: Silicone
Thickness: 2.4 mil(0.06mm), 1 mil polyimide film, 1.4 mil adhesive
Adhesive power(N/25mm): 7.5
Tensile strength(N/25mm): 115
Elongation: 55%
Breakdown Voltage: 4.5kv
Temperature Range: -73°C – 260°C (-99°F - 500°F). Long-term temperature: 260℃(500 ℉) & Short-term temperature: 300℃(572 ℉)
Strong Silicon Adhesive Protection
No residues left after you peel them off and they always holds tight throughout the tape’s rated temperature range.
High Temperature Resistance
Heat resistant tape is a polyester film tape with a high temperature resistant adhesive. Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework.
|
|
|
---|---|---|
SizeThe width of the high temperature tape (10mm / 0.39inch) is very suitable for thermal transfer, which can meet the needs of use without causing waste. |
Heat ResistantThis heat-resistant tape is compatible with a wide temperature range of up to 260℃ (536℉). |
No ResidueThe heat-resistant and strong silicone adhesive makes the heat transfer tape easy to stick and no residue after peeling off. |