Feature

●OIL PRESSURE TESTER - Automotive oil pressure gauge tester kit tests lubrication system problems quickly and accurately, help to judge if there are blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
●WIDE COMPATIBILITY - This transmission pressure gauge kit is suitable for gasoline and diesel engines on most car, truck, SUV, motorcycle, ATV, UTV, RV so on.
●UP TO 500PSI / 35BAR - Provide with dual scale readings 0-140psi (0-10 bar). Rubber cover protected gauge with large 3-1/2" O.D. is easy to read and provide you more precise and accurate readings.
●ALL IN ONE SET - Equipped with various adapters and universal gauge hose (40"L with 1/8" NPT steel adapter) to connect for testing, great for 1/16", 1/8", 1/4" and 3/8" oil line fittings.
●LONG LASTING MATERIALS - Designed for repeated use with high quality materials (brass, steel, rubber and resin), rugged and long-lasting. Excellent air-tightness and avoid any leaking.


Description

11

Automotive Engine Transmission Oil Pressure Tester, Gearbox Oil Pressure Gauge Kit with Hose and Adapters

11

CONTENT LIST:

1x 3-1/2" Pressure Gauge with 40" Long Hose and 1/8" NPT steel Adapter

1x 3/8" NPT Male x 1/8" NPT Female steel Adapter

1x 1/8" NPT Female x 1/8" NPT Female steel Adapter

1x 1/4" NPT Male x 1/8" NPT Female steel Adapter

1x 1/8" NPT Male x 1/8" NPT Male steel Extension Adapter

1x 1/4" NPT Male x 1/8" NPT Male steel Adapter

2x 1/8" NPT Male x 1/8" NPT Female steel Adapter(90 Degree Elbow)

2x 1/8" NPT Male x 1/8" NPT Female steel Adapter

2x 1/16" NPT Male x 1/8" NPT Female steel Adapter

11

EASY TO OPERATE:

1. Remove low oil pressure switch

2. Attach tester using appropriate adapter(s) for the engine

3. Start engine

4. Read the pressure on the gauge

5. Verify vehicle oil pressure is normal against manufacturers recommendations

6. Remove tester and turn off the engine

7. Replace the low oil pressure switch

11
11

11

11

11

Multi-layer thickened pipe to ensure safety

Accurate and stable gauge

Rugged and long-lasting materials

DIAGNOSTIC RESULT:

  • Please refer to equipment manufacturers operation instruction and compare to the manufacturers recommended readings, to check if the reading is out of the normal range. And check if the dashboard light works well or not
  • BELOW THE MINIMUM OIL PRESSURE: blocking oil strainer or oil filter, broken pressure-limiting valve spring , poorly working oil pump, low oil viscosity
  • ABOVE THE MAXIMUM OIL PRESSURE: high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open

NOTE:

  1. Please wear gloves and goggles when use
  2. Test oil pressure by professionals or under the guidance of a professionals
  3. You can use Teflon tape to wrap around thread connector to get better sealing