Feature
●The engine oil pressure tester kit is used to diagnose and test the engine oil pressure,The measured value can be used to judge the operation of fuel system components such as electric gasoline pump, oil boiler pump and oil pressure regulator.
●This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy.
●The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
●8 pieces spare o-rings of different sizes for replacement.works with long-lasting seals to prevent leakage even under extreme conditions.
●Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use
Description
Check cylinder compression pressure precautions
(1) The cylinder pressure cannot be measured during a cool car. Due to factors such as temperature and atmospheric pressure, the cylinder pressure measured only when the engine reaches the normal operating temperature has a substantial reference value.
(2) For the EFI diesel engine, the fuel pump insurance or other relay insurance must be removed and tested again, otherwise, it will lead to “draining cylinder” and low cylinder pressure.
(3) During the test, the throttle choke must be fully opened, otherwise, the cylinder pressure will be low due to insufficient intake air in the combustion chamber.
(4) Since the cylinder pressure measurement has a certain contingency, it is often inaccurate to measure only once. Only after 2 to 3 tests and then take the average value, the test result is effective and reliable.
(5) The starter running time in the test should not be too long or too short. Excessive time will consume too much power and damage the starter. If it is too short, it will not meet the test standards.
|
|
|
|
|---|---|---|
|
This is a relatively simple bit of kit, a pressure testing tool for various parts of combustion fuel systems. It is pretty standard, with ten different oil pressure tester adapters to fit exactly the system you are testing. It has a nice 3-inch dual dial that is easy enough to read, Scales are 0-140 PSI and 0-10 Bar. The hose and brass fittings are all of reasonable quality. |
1 × Oil Pressure Gauge with Hose 1 x 90 ° elbow coupling adapter 1 × R1 / 8DIN2999 Adapter 1 × 1 / 8 × 27NPT Adapter 1 × 1 / 4 × 18NPT Adapter 1 × 3 / 8 × 20UNF Adapter 1 × 1 / 2 × 20UNF Adapter 5 × fitting (M10, M12, M14, M16, M18) 1 × User Manual |
Pressure Gauge : Dial Diameter: 3", Gauge Scale Range: 0 to140PSI, 0 to 10Bar 1 x 90° Elbow Connector Quick Coupler 10 x Spare O-Rings |
