Feature
●Advantage - With the help of the built-in cutter and winding mechanism, the strapping can be tightened and cut quickly and effectively
●Features - This CV joint plier is easy to use, which is essential to crimp and flatten clamps on ear type CV joint boot clamps
●Application - This kind of CV joint clamp is practical and suitable for ear hose clamps on fuel, cooling system and vacuum hoses
●Material - Pliers constructed from pressed steel with black-coated finish; With non-slip rubber handle, can effectively reduce user fatigue
Description
CV Joint Boot Clamp Pliers
Material
Pliers constructed from pressed steel with black-coated finish.
Design
Its designed with a built-in cutter and winding mechanism, which can tighten and cut the strapping quickly and effectively.
Specifications
- Material: Steel, Plastic
- Handle Material: Rubber
- Total Length: Approx. 8.66in / 22cm
- Package Weight: Approx. 1.1lb / 0.5kg
CV Joint Boot Clamp Band tool
- For fast and simple tensioning and securing of CV boot banding strap.
- Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses.
- Can also be used for securing late model GM CVJ boot clamps.
Instructions for Use
|
|
|
|
|
|---|---|---|---|
Step 1Wrap free-end clamps 3/8” or 1/4” roll band and clip around boot. Thread the band through the clip, into the nose of the tool and through the winding mandrel slot. |
Step 2Place a 1/2” ratchet wrench on the winding mandrel and turn. When sufficient tension has been applied, rotate the tool over the boot, bending the band back onto the clip. |
Step 3It applies tension and has a built-in cutter. |
Step 4To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip. NOTE: For added strength, double-wrapped band is recomended. |
CV Joint Ear Type Pliers
- Ideal for installing clamps fuel filters.
- For all ear-type clamps including GM FWD outboard CV joints.
- Great for CV joint boots and other cooling system hoses.
