Feature

●1.Fully Compliant With the RTP-MIDI Open Protocol
●2.Connect the MIDI Five-Pin Interface Device to the Local Area Network
●3.With Listener/Initiator Mode Switching, Networking can be Done Without a Computer
●4.High-Quality Metal Shell for the Whole Body, Resistant to Falling and Anti-Collision
●5.High Stability, Low Delay, the Minimum Delay can be Less than 1 ms


Description

Product Parameters

Model M R 1 Pro
Size (L x W x H) 83 x 55 x 30mm
MIDI Interface Built in high speed optocoupler, 5 Pin interface, 16 channel MIDI interface with one input and one output for high performance processing
MIDI LAN Interface Standard Ethernet RTP MIDI interface
Indicator Light Network communication indicator, Network working indicator
POWER Interface Use DC interface for power supply, power supply voltage 5V~9VDC
MIDI Compatibility Compatible with all MIDI devices with MIDI standard interface
Listener Mode Support up to 5 RTP MIDI terminals connected at the same time
Initiator Mode Support up to 3 DOREMiDi RTP MIDI devices connected at the same time
Power Consumption About 0. 8 W, 80mA(@9VDC), 150 mA ( 5VDC)
IP Address By default, the IP address is automatically obtained, and the IP address is assigned through a router with DHCP function. It can also be set as a static IP address
11

Appearance

1.MIDI OUT: 5Pin MIDI interface, connect to the MIDI IN inter face of MIDI Device.

2.MIDI IN: 5Pin MIDI interface, connect to MIDI OUT interface of MIDI device

3.MIDI LAN: Ethernet interface, connect Ethernet equipment through network cable, such as

network router, network switch, etc.

4.DC IN 5V~9V: Product power supply port, power supply voltage 5~9VDC, use DC5.5*2.1 plug,

tip is positive and sleeve is negative

5.MODE: Mode switch button, Long press 3 seconds to switch initiator listener mode , Long press

for 10 seconds to restore factory settings (red and blue indicators flash alternately)

6.LED: Mode indicator, blue is listener mode, red is initiator mode , The red and blue indicators

flash alternately to restore factory settings